Is it time to start your own service operation?

Is it time to start your own service operation?

The latest numbers from ATA’s Technology and Maintenance Council (TMC) and FleetNet America benchmarking study noted that the average cost of a roadside maintenance event per mechanical repair in Q4 2018 was $334.20—the highest it had ever been since the quarterly benchmarking project started more than a year ago.

Thinker-600x300

Increased labor rates. Truck downtime that’s stretching into four, five, even as high as 10 days until the service is completed. Service that’s outside the scope of your contracted PM agreement or extended warranties. It all starts to add up. In fact, the latest numbers from ATA’s Technology and Maintenance Council (TMC) and FleetNet America benchmarking study noted that the average cost of a roadside maintenance event per mechanical repair in Q4 2018 was $334.20—the highest it had ever been since the quarterly benchmarking project started more than a year ago.

As a fleet manager who sees those costs pile up on his desk, you feel the frustration building to the point where you want throw up your hands and say that if you want something done right, you might as well do it yourself. But should you? When you take out the frustration and look at the facts—is there ROI in starting up, or expanding, your in-house service capabilities?

For any service operation, the question a maintenance manager has to ask himself when a truck rolls onto the lot is: Is this a service job that I can tackle? If you’re entertaining the idea of dipping your toe into in-house service, the logical and most profitable place to start is with preventative maintenance.

“Bringing PMs and, what I call, ‘runny nose stuff,’ is where I think fleets need to focus in the next few years,” said Darry Stuart, president and chief executive officer of DWS Fleet Management Services, an independent transportation and fleet management business. “Let me give you an example: One of my clients has his main garages in Connecticut, but 60 miles down the road from that location he has a one-bay shop, and he loves that shop because all they do there is PMs and it’s easy to manage.”

Stuart noted that one of the biggest complications is the extended service warranties dealerships pitch that provide value to a point, be it in the scope of work covered or the terms and length of the warranties, but when the service needs fall outside that contracted realm, costs can go through the roof.

Now consider your trade cycles, if your strategy is to turn a truck around after three to four years, then you’d likely be able to reap the in-house PM shop ROI. Again, here’s Stuart:

“Once you get beyond the first three years of a truck’s life, then it’s the real runny nose service issues that get you,” he said, pointing to aftertreatment system service issues, wiring harness issues and other major service events that tend to crop up after three to four years in a truck’s lifecycle. “So it could be as simple as doing your own oil changes, simple, predictable PM checks—depending on your application and operating environment—and then be done with it. But if you’re going to keep the truck longer than three years, you’ll have to prepare.”

Wondering what questions you should ask your service providers? Check out our list of questions here.

A service success story

Starting a shop is no small task. Location, equipment, technicians, training, scheduling and management—the list goes on. Once you figure out your equipment operation strategy, you’ll need a service strategy. And know that your strategy will shift once you start seeing success.

Atlas Trucking relied on third-party service providers until about four years ago when the fleet decided to take its service matters into its own hands.

“Our problem started much like everybody else’s problem—we couldn’t get our trucks in anywhere,” said Marc Scibilia, Atlas Trucking director of safety and maintenance, who explained that its service operation started on a dirt lot then grew into a two-bay shop that ballooned into a 10-bay shop that services all trucks—not just Atlas Trucking’s iron. Scibilia was quick to point out that the growth was driven primarily by opportunity.

“We had an opportunity to purchase a building and renovate it to build out our service capabilities and sell our services to outside customers,” Scibilia said. “What we found was that even in our two-bay shop, we had outside customers asking if we would do work for them. So we fix anyone’s truck. We have our competition in here. I don’t have a list of people I won’t work with.”

And Atlas Trucking’s service operation does a lot. Scibilia runs 24-hour shifts, tackling 100% of Atlas Trucking’s service needs as well as its outside customers. Often times that means working on Atlas’s trucks on the midnight shift and opening the daytime shifts to outside customers, and word is getting around.

“We have found that word of mouth is a strong driver,” he said. “We’re not as busy as we’d like to be, but we’re still in our infancy and we’re still growing and making a name for ourselves.”

While the operation still has plenty of room to grow, its understanding of the latest in heavy-duty service technology is on the cutting edge. Scibilia noted that its shop has been leveraging predictive maintenance solutions for the past year and a half.

“We have been able to save at least two engines from rebuilds by pulling oil samples and catching issues before they damaged the whole engine and then fixed an issue and got the trucks back on the road,” he said. Atlas Trucking performs intensive preventative maintenance inspections and captures all of that data in order to analyze and see service issues that are coming down the road. It’s incredibly powerful, but it’s not easy.

“It takes a ton of training and continuous, daily management,” Scibilia stressed.

Integration is also key.

“Our system integrates into Omnitracs, and it also integrates into our back-office dispatch software,” he explained. “If a driver performs a DVIR, it automatically opens up a work order and we get to see it and then contact our operations or even the driver to schedule it in and get it fixed. It also lets us reorder our parts right from the system. When a parts request is filled out by the technician, the parts department automatically receives it, scans, it, puts it on the work order, gives the parts in the technician, and then he completes it, closes out the work order and then it comes to the front desk for finalization.”

Atlas Trucking relied on third-party service providers until about four years ago when the fleet decided to take its service matters into its own hands.

“Our problem started much like everybody else’s problem—we couldn’t get our trucks in anywhere,” said Marc Scibilia, Atlas Trucking director.

For more on this topic, read our story on communication to reduce downtime here.

You May Also Like

Power Heavy Duty adds Childers Auto and Truck Parts

Membership in Power Heavy Duty will help Childers focus on growth and expansion.

Childers-auto-truck-parts-power-heavy-duty

Power Heavy Duty announced that Pikeville, KY-based distributor Childers Auto and Truck Parts has joined its network. Founded less than a year ago, Childers Auto and Truck Parts is a subsidiary of Ken’s Towing & Service, which has been helping those in, around and passing through Pikeville get out of tight jams and back on the road for more than 25 years. They say they’ve rescued vehicles – including many heavy-duty trucks – stuck in snow drifts, flipped into creeks and dangling dangerously close to a steep descent down an Appalachian mountainside.

Freightliner M2, SD Plus Series launch updates its medium-duty truck offering

Freightliner introduced the new Plus Series–enhanced versions of its M2 and SD models, including the M2 106 Plus, M2 112 Plus, 108SD Plus, and 114SD Plus. The enhanced models provide a major update to the interior and electrical systems of the M2 and SD models. The OEM noted that the Plus Series is designed to

Freightliner-MD-SD-Plus-Series-1400
Truck cruise control technology that looks at the road ahead

If you’ve ever visited the Northeast region of the country, you’ve most likely encountered intimidating terrain. The winding roads. The steep hills. The intricate routes that challenge any seasoned driver, and, most recently, advanced cruise control systems that aim to improve fuel efficiency and driver comfort.   Related Articles – Four ways A.I. can help cut

Four ways A.I. can help cut diesel fuel costs

The fluctuation of fuel prices has made it more challenging to operate day-to-day. Drivers get paid by the mile, and, when fuel costs go up, margins shrink, impacting how fleets profit and pay their employees. Intelligent technology can lessen the impact of high prices by improving overall fuel efficiency. Related Articles – New ways to

trucking-technology-hacking
Peterbilt GM Jason Skoog charts today’s truck support, tomorrow’s truck solutions

Peterbilt made headlines recently when it became the first major North American OEM to open orders for an electric truck, the Peterbilt 220EV. In this exclusive interview, Peterbilt General Manager and PACCAR Vice President Jason Skoog details the technology investments that are keeping fleets productive during this year’s trying pandemic and laying the groundwork for

Peterbilt General Manager PACCAR Technology Electric Truck

Other Posts

Stemco expands extended warranty coverage to P.S.I. products

The Platinum Performance System Plus now includes Stemco P.S.I.-ready hubcaps and additional Stemco components.

P.S.I.-STEMCO-products-extended-warranties-pressure-systems-international
DMA Industries expands BrakeMaster wear sensors

The addition of 17 new OE replacement brake sensors now brings the BrakeMaster line up to a total of 264 products.

DMA-expands-BrakeMaster-brake-wear-sensors
Hexagon Agility receives orders for Class 8 Cummins X15N CNG trucks

The CNG/RNG fuel solutions company says orders paired with Cummins X15N engines are coming in, and expected to ramp up.

Hexagon-CNG-Cummins-X15N-Kenworth-orders
ACT Research: Freight capacity decline likely to continue

The latest release of ACT’s For-Hire Trucking Index reflects the slowly progressing freight market recovery.

ACT-for-hire-volumes-Jan-2024