Daubert Chemical releases study results on corrosion resistance of galvanized steel

Daubert Chemical releases galvanized steel corrosion resistance study

Daubert Chemical announced the results of comparative corrosion resistance testing that revealed the limitations of galvanized steel and its inability to withstand exposure to the most common corrosive agent, sodium chloride. In salt spray exposure tests following American Section of the International Association for Testing and Materials (ASTM) B117 standards, Daubert compared galvanized steel I-beams to I-beams coated with Daubert’s Nox-Rust 1210HP wax-based coating.

The company performed the experiment in response to its OEM customers’ inquiries regarding the viability of galvanized components in trailer chassis construction.

“Questions about the use of galvanized steel chassis components have arisen among truck and trailer OEMs in recent years,” Mike Duncan, Ph.D., vice president of technology for Daubert Chemical, said. “As we discussed the topic with our customers, we realized that nobody had done a definitive study on the subject, and that’s when we decided to undertake formalized testing.”

Also known as salt fog testing, the ASTM B117 is a standardized method used to assess the corrosion resistance of various surface coatings and is often used in side-by-side comparisons that demonstrate the relative effectiveness of different coatings. Salt spray testing is an accelerated corrosion test that approximates the long-term protective efficacy of a coating and is equally effective at predicting its failure rate.

The test results showed that after 1,000 hours of exposure to the saline spray, the galvanized steel I-beam underperformed in comparison to the I-beam coated with Nox-Rust 1210HP wax-based coating. The continuous salt spray exposure caused the galvanized sample to begin visibly shedding its protective zinc coating in the form of zinc oxide, also known as white rust.

The zinc coating used in the galvanizing process is known as a sacrificial anode because it corrodes first, in preference to the metal substrate it is designed to protect. In contrast, a wax-based coating like Nox-Rust 1210HP is hydrophobic and repels water molecules, preventing the oxidation that can be caused by moisture contacting the metal beneath its protective layer.

Using galvanized metals for trailer construction presents other problems as well, according to Daubert Chemical. Galvanized steel is only protected as long as the zinc coating is in place. Trailer assembly processes, such as attaching landing gear, slider suspension boxes, wing plates, lighting brackets and the like, often includes welding, grinding and drilling operations that can dislodge the zinc coatings on galvanized steel, causing hazardous particulate matter to become airborne. Once the protective zinc is removed, the steel substrate is vulnerable to corrosion due to both oxidation and galvanic reaction from contact with dissimilar metals.

In contrast to galvanization, the Nox-Rust 1210HP coating is self-healing, according to Daubert Chemical. With Nox-Rust, a residual anticorrosive barrier of the wax-based material is retained even after machining of pre-coated stock has taken place. The Nox-Rust coating is also available as a touchup solution that can be applied to areas where the coating has been significantly disturbed in the assembly process. Nox-Rust 1210HP also adheres to fresh welds and provides residual oxidation and galvanic suppression during the application of screws, bolts and other mechanical fasteners, the company said.

“The idea that corrosion can be avoided by building a trailer using galvanized components is a myth,” Duncan said. “You simply can’t take corrosion out of the equation with galvanized steel, but you can successfully manage corrosion on all exposed metals, including galvanized, very cost-effectively with hot-melt wax-based coatings like Nox-Rust 1210HP.”

You May Also Like

Goodyear unveils two RangeMax tires deisgned for regional work

Goodyear says the new tire models balance traction, range and mileage for work vehicles running on electricity, gas or diesel.

Goodyear-rangemax tires-group-logo

The Goodyear Tire & Rubber Co. introduced two additions to its portfolio of RangeMax tires: the RangeMax RSA ULT and the RangeMax RTD ULT. Goodyear says its latest RangeMax tires are a steer-drive combo engineered for electric, gas- or diesel-powered regional work vehicles.

Goodyear says the all-position RangeMax RSA ULT and RangeMax RTD ULT tires help deliver range efficiency through low rolling resistance and long miles to removal. 

Vipar Heavy Duty’s Supplier Advisory Council reviews performance, strategy

The council is expecting a stable aftermarket with moderate growth, a reliable supply chain and continued expansion of VIPAR Heavy Duty in 2024.

vipar-heavy-duty-supplier-advisory-council
Davco introduces Fuel Pro 499 for Class 8 trucks

The company says its latest diesel fuel/water separator was designed to increase filtration capacity and reduce fleet downtime.

DAVCO-fuel-pro-499-water-separator-filter-TMC-Clarience-Technologies
PACCAR Parts presents Dealer of the Year awards at Kenworth Dealer Meeting

Dealer of the Year awards were given out for both TRP and Kenworth parts and service dealers.

PACCAR-Parts-dealer-of-the-year-Kenworth-Northeast-group
Double Coin FR610, other tires to be displayed at MATS

The FR610 is the latest SmartWay Verified long haul steer tire in Double Coin’s lineup.

Double-coin-logo-truck-tire-generic

Other Posts

Dorman announces new light- and heavy-duty aftermarket parts

The company says it released more than 200 light-and heavy-duty aftermarket parts in February, developed for technicians and DIY customers.

Dorman-new-parts
Hendrickson launches Roadmaax Z with ‘Zero Maintenance Damping’

Hendrickson says this is the first drive axle suspension system its released with integrated ZMD technology.

HENDRICKSON-ROADMAAX-Z-SUSPENSION
Lincoln Electric launches Ranger Air 260 MPX multi-function engine drive

Lincoln Electric recently introduced the new Ranger Air 260MPX multifunction engine drive.

Clean Energy’s RNG digester at Tri-Cross Dairy begins production

RNG from the $34M project will be sent to Clean Energy’s network of fueling stations across the U.S.

Clean-Energy-RNG-Facility-Tri-Cross-Dairy