Reyco Granning offers new suspensions suited for electric vehicles

Reyco Granning offers new suspensions suited for electric vehicles

Reyco Granning develops customizable EV suspension for trucks and buses.

Reyco Granning Electric Vehicle Solutions announced two new EV compatible suspension products: the 79KB and the 240AR-EV.

The 79KB is a customizable suspension available for Class 5 through 8 trucks, and according to the company, the system is available in a variety of capacities with options that include stabilizer bar, taper leaf springs, helper springs, shock absorbers, and disc brake compatibility. Additionally, the recent press release notes that a new high-capacity variant with 35,000 lb. GAWR allows customers to configure a 4X2 with a GVW that would have required a 6X4 in the past.

The 240AR-EV has a GAWR range of 17,000 lb. (7.7 t) to 23,000 lb. (10.4 t) and is suitable for single or tandem drive axle arrangements. Low profile frame brackets leave room for body mounts or fifth wheel angles. Reyco Granning notes that the curved spring beam eliminates the traditional lower air spring mount to increase ground clearance and reduce weight and is ideally suited for on-highway truck, tractor, motor home or bus applications.

You May Also Like

Dana introduces reusable differential gaskets to market

Since no room-temperature vulcanizing (RTV) silicone is needed, there is an instant seal, so service technicians do not have to wait for reassembly.

Dana Inc. has introduced a new line of Victor Reinz Victor-Lock reusable differential gaskets designed for severe-duty applications. These gaskets, according to the company, feature FoamFlex facing material bonded to a steel core with selective silicone beading to enhance sealing stress and improve loading in critical areas.

Victor-Lock reusable differential gaskets are manufactured with FoamFlex material on both sides of the gasket to provide a level of compression and recovery while the steel core provides strength, Dana notes. The company says that the Victor Reinz blue elastomeric sealing bead localizes sealing stresses, aids in sealing in between bolt holes, and provides protection for castings that are not perfectly flat or in perfect alignment. There is also an instant seal, so service technicians do not have to wait for reassembly, according to the press release.

Eaton’s stamped battery terminals deliver energy cycling performance, weight savings for EV, ICE vehicles

Eaton offers stamped battery and eyelet terminals for both electrified vehicles (EV) and internal combustion engine vehicles.

PACCAR Parts German distribution center breaks ground

According to PACCAR, the facility will have the capacity to store over 80,000 different parts.

Double Coin announces new appointments

As regional sales managers, Crandall will manage the Mississippi River/Mid-South region and Decker will oversee the Western region.

Roadwarrior introduces line of EGR coolers

The EGR coolers are tailored for Cummins, Volvo, Mack, and Detroit heavy-duty engines.

Other Posts

Mullen’s first Class 3 production vehicles roll off the assembly line

Class 3 production capacity at Mullen’s Tunica facility is currently planned at 3,000 vehicles annually per shift.

Photo Gallery: Driving Volvo Trucks electric European lineup

Behind the wheel of Volvo Trucks’s zero-emissions European lineup and what it might mean for the U.S.

Answering the biggest zero-emissions trucks questions

Volvo Trucks fields questions from what type of zero-emissions technology will work for certain applications and how it impact fleets.

Volvo Trucks on its global zero-emissions trucks strategy

Hydrogen fuel cell development, electric truck technology and infrastructure rollout dominates the conversation.