Axles Archives - Page 2 of 11 - Fleet Equipment Magazine
Cummins to acquire Meritor

Cummins Inc. and Meritor Inc. announced that they have entered into a definitive agreement under which Cummins will acquire Meritor. Under the terms of the agreement, Cummins will pay $36.50 in cash per Meritor share, for a total transaction value of approximately $3.7 billion, including assumed debt and net of acquired cash. “This agreement with

Cummins-Meritor-Acquisition-1400
Meritor, PACCAR Extend Electrification Agreement

Meritor has announced an extension to its current PACCAR agreement to supply 14Xe ePowertrains and battery electric vehicle integration kits for theClass 8 Kenworth T680E, and Peterbilt 579EV tractors and 520EV refuse trucks. The integrated, modular design of the 14Xe ePowertrain, Power Controls and Accessories (PCAS) and Energy Storage System (ESS) helps enable PACCAR to meet

Meritor-14XE-electric-truck-axles
What fleets need to know about truck e-axles

As a highly efficient power source for propelling electric vehicles, truck e-axles are designed to go beyond providing just torque and power. They also balance performance, durability and reliability to allow maximum time on the road per charge. Click here to watch more of FE’s On the Road video series. Here is a transcript of

e-axles-1400
Meritor talks trucking aftermarket advancements, sets new goals

During Heavy Duty Aftermarket Week, Meritor’s aftermarket and product leadership sat down to provide an update of its aftermarket initiatives and the evolution of existing aftermarket products. Here’s the rundown. Electrification in the aftermarket Meritor is barreling ahead toward electrification. It recently announced series production of its 14Xe ePowertrain. When asked what opportunities the ePowertrain

Meritor-14Xe-Electric-Axle-Powertrain
Dana to showcase new products, technology at HDAW

Dana Incorporated will feature a wide array of products during Heavy Duty Aftermarket Week (HDAW) at the Gaylord Texan Resort held Jan. 24-27 in Grapevine, Texas. During HDAW, Dana team members will demonstrate the benefits of the DanaAftermarket.com e-commerce platform and eRFQ marketplace. Dana will share information with attendees about the Spicer ReadyShaft and Spicer

Dana-Aftermarket-HDAW-News
The biggest truck component stories of 2021

If you’re reading this the day we posted it–Merry Christmas! You’re probably at a family gathering scrolling on your phone and avoiding eye contact with that one family member you’ve ducked thus far. Well, put on your best serious face to show that you’re really into what you’re reading and get ready to have your

Best-of-Components-1400
Meritor begins production of electric commercial vehicle powertrain

Meritor Inc. announced its 14Xe ePowertrain is now available and will be in production this month. As part of Meritor’s Blue Horizon advanced technology portfolio, the 14Xe ePowertrain is a fully integrated, all-electric drive system. “Our 14Xe ePowertrain has been thoroughly tested hauling loads and logging real world miles in various conditions and multiple applications,

14Xe-Tandem-ePowertrain-1400
Should you spec pusher axles on over-the-road trucks?

Traditionally, pusher axles are used in vocational applications to distribute the vehicle weight and ensure the other axles are not overloaded. Pusher axles on an on-highway vehicle… well, pusher use has been considered limited because tractor-trailers typically won’t be overloading the other axles. However, in recent years, over-the-road applications like linehaul and regional haul have

pusher-vs-tag-axles-WIX-1400
When to use pusher axles over tag axles

Most commonly found in vocational applications like dump trucks, refuse trucks and mixers, pusher axles are in the same family as tag axles when it comes to 6×2 configurations. This means only one of the two rear axles receives power, as opposed to a 6×4, where both of a tractor’s rear axles are drive axles.

pusher-vs-tag-axles-WIX-1400
Allison Transmission completes electric axle production assembly line installation

Allison Transmission has completed the installation of a new e-Axle production assembly line at Allison’s electric axle development and manufacturing facility in Auburn Hills, Mich. This production line integrates automated assembly features and will manufacture Allison’s eGen Power series of fully integrated electric axles, as Allison prepares to progressively increase the output of pilot builds.

Allison-E-Axles-Auburn-Hills-2021-009-1400
Stemco launches hubodometer selector web tool

Stemco has announced a new tool for customers to find the right Stemco Hubodometer products for their fleets. The new Hubodometer Selector on the Stecmo website leads its users through the process by recommending relevant product offerings according to vehicle brand, model, or tire measurements. The Hubodometer is a device mounted on the axle of

Stemco-Hubodometer-Web-Tool-600
Five truck trend takeaways from October

We know it’s not easy to keep up with everything that happens in the world of trucking. So here are the biggest stories from October focused on the latest truck trends, all in one place. 5. Electric trucks could change service shop operations Electric trucks are coming and reduced maintenance is potentially coming along with

oct5takeaways-1400