Shop Equipment Archives - Page 9 of 42 - Fleet Equipment Magazine
Vessel Tool releases Megadora Screwdriver

Vessel Tool has released the Magadora Screwdriver, which the company says features a “jawsfit” mechanism to allow the blade to bite into screws for easy removal.

Vessel-Tool-Megadora
Bosch releases software update for ESI[truck]

Bosch has released a new software version 2019/1 for the ESI[truck]. In addition to the ESI[truck] software, the new Off-Highway Software package is also available, giving technicians the ability to diagnose construction and agricultural vehicles, according to Bosch. New software additions include extended coverage for electronic control systems, wiring diagrams, fault codes and troubleshooting by

Bosch-ESI-Truck
The importance of ALI certification for heavy-duty lifts

As part of our feature on lift safety in heavy-duty shops, we asked members of the Automotive Lift Institute about how ALI certification is earned, and why this is important. Here’s what Dale Soos, senior project engineer for ALI, and R.W. “Bob” O’Gorman, president of ALI, wrote in response: Not all lifts are manufactured the

Seven steps to heavy-duty truck lift safety

A heavy-duty shop can be a dangerous place. And that’s especially true when there’s a 25,000-plus-lb. vehicle over your head. Heavy-duty lifts are a crucial part of any shop, but considering the risk involved in raising such loads and working under them, it’s clear that it’s incredibly important to make sure that they are maintained

CanDo adds DPF resets, regen for International MaxxForce Engines to its HD Code II, HD Mobile

CanDo has announced the addition of International to its coverage for DPF resets and regeneration for both the CanDo HD Code II and HD Mobile. New and existing customers can update their tools to gain access to these new features. MaxxForce 5, 7, 11, 13, 15, and DT9/10 are covered. Both the HD Code II

CanDo
LithiumHub.com announces new jump starter battery for diesel engines up to 16 liters

LithiumHub.com has introduced the JumpBooster JP30 a new jump starter battery that the company says is designed specifically to jump start heavy-duty diesel trucks instantly. The unit weighs in at 11 lbs. and produces a full 3,000 peak cranking amps, more than enough to start any diesel truck engine up to 16 liters in displacement according

LithiumHub-Jumpbooster-heavy-duty-diesel-truck
LiftWise releases 6500 Series Wheel Handler

LiftWise has released the 6500 Series Wheel Handler, which the company says is designed for any operation that needs a safe method for transporting and changing large tires, and is able to be used by one person. According to the company, the Wheel Handler allows the operator to stand in the best vantage point for

LiftWise6500WheelHandler
John Bean expands and enhances heavy-duty wheel service product line

Heavy-duty wheel service products company John Bean has expanded and enhanced its heavy-duty product line. The expanded, enhanced line of John Bean heavy-duty wheel service products includes the following products, as described by the company: Wheel Balancers, including the new John Bean 9800 balancer that is specially designed to balance truck, bus, RV and automobile

Snap-on releases heavy-duty parts washer

Snap-on has released the PBC58 Heavy-Duty Automatic Parts Washer, which can be used to clean many large automotive parts such as gas and diesel engine blocks, cylinder heads, valve covers, pans, transmission cases, as well as smaller items down to nuts and bolts. “An effective parts washer is vital for shops that service newer, larger

OTC releases 5295 Powertrain Lift

OTC has introduced the 5295 Powertrain Lift, which the company says is uniquely designed to handle removal and installation of electric vehicle batteries, fuel tanks, suspension systems and other powertrain assemblies. The sliding split table top design allows for separation of the engine and transmission assembly or the hybrid engine and generator module, and the

Rotary Lift introduces new two-post lifts for work trucks

Rotary Lift has introduced the SPO16 and SPO20 two-post lifts for work trucks and smaller vehicles. “Our customers are asking for heavy-duty lifts capable of servicing their entire fleets. The SPO16 and SPO20 deliver the versatility needed to make that happen,” says John Uhl, director of lift product management for Rotary’s parent company, Vehicle Service

Bosch introduces five new bladder adapters for its HPT 500 HD smoke machine

Bosch has introduced five new bladder adapters in North America for its HPT 500 heavy-duty smoke machine. The adapters seal off various-sized pipes and hoses when checking for leaks and range in size from 1.5 to 5.9 in. Each bladder expands to completely seal hoses and pipes in exhaust, intake and turbocharging systems so they