TPMS systems provide CSA violation prevention benefits

TPMS systems provide CSA violation prevention benefits

Aperia-Halo-Tire-Inflator
Aperia Halo Tire inflator installation

Fleet managers are under increased equipment performance pressure, not the least of which comes from ensuring that their trucks on the road meet all CSA standards. Violations can quickly add up, and improperly inflated tires—especially flat and blown tires—can be a red flag for enforcement officers. That’s where tire pressure monitoring systems (TPMS), as well as automatic tire inflation systems (ATIS), come into play.

“Use of ATIS and/or TPMS in proactive tire pressure maintenance programs help carriers avoid a number of vehicle maintenance related CSA violations,” said Josh Carter, chief executive officer of Aperia, maker of Halo Tire Inflator, a bolt-on device that uses a wheel’s rotation to inflate and automatically maintain optimal tire pressure. “There are the direct tire pressure related violations like the eight-point flat tire violation, as well as numerous other tire related violations that are impacted by the excessive tire heating and flexing caused by underinflation.”

TPMS systems can advise the driver and/or fleet of a problem before the vehicle leaves the yard or gets on the road so that the tire issue can be corrected before the vehicle reaches an inspection station; thereby eliminating a citation opportunity.

“Even the most conscientious driver can end up with a citation if he doesn’t know what’s happening outside his cab,” said Bob Montgomery, vice president of Innovative Tire & Mileage Solutions for Stemco, which offers a TPMS solution, called BatRF, and an ATIS, called Aeris. “Both BatRF TPMS and Aeris automatic tire inflation help drivers prevent flats and blown tires by warning immediately about tire issues [BatRF and Aeris] and maintaining appropriate pressure when tires are leaking [Aeris],” he said.

The true value of TPMS and ATIS is the ability of the fleet to reduce tire and fuel expenses, as well as improving maintenance practices that help to ensure a flat or blown tire is prevented before it happens.

Stemco-BatRF-TPMS
Stemco BatRF TPMS solution

“Wabco’s Integrated Vehicle Tire Monitoring System [IVTM] can warn the driver through visual or other signals to keep the vehicle’s tire pressures in safe driving condition,” said Brent Fitch, Wabco’s director of fleet sales. “The most obvious system warning is triggered by significant loss of tire pressure. IVTM will also warn the driver as a result of a slow pressure leak. A live feed of tire data allows the driver to constantly maintain optimum tire pressure. There are a number of CSA violations that pertain to tire pressure. With IVTM, the majority of tire pressure related CSA violations could be avoided.”

Walk-around inspections are far from fool proof when it comes to proper tire pressure. Many times a tire may seem to be at the correct PSI, but is not even close. The driver is technically responsible for any tire-related issue, but all BASIC violations count against the carrier.

“Under-inflated tires may seem like a minor infraction, but that can also lead to flat tires very quickly, which are a heavier violation. The real problem is when a tire fails—this puts the driver at risk, along with anybody in his or her path,” said Zach Rothstein, marketing manager for Mobile Awareness, which offers MobileTRAQ TPMS, a commercial vehicle smart device that is able to collect, store and transmit tire data. The MobileTRAQ Vue is a customizable in-cab monitoring device, while MobileTRAQ Que is a non-display device that allows for remote truck or trailer monitoring.

Wabco-Integrated-Vehicle-Tire-Monitoring-System
Wabco’s Integrated Vehicle Tire Monitoring System [IVTM]
Whether it’s helping to improve maintenance practices or avoiding CSA violations by catching any potential tire issues before the tractor and trailer hit the road, the savings can be substantial. “One fleet with a severe service operation hauling scrap metal was experiencing many tire problems. It reduced its four-times a week service calls by its tire dealer to once a week by installing TireVigil TPMS, which saved it approximately $6,000 a month,” reported Peggy Fisher, president of TireStamp Inc. TireVigil TPMS and TireVigil TPMS Trailer monitors tire pressure and temperature, in addition to vehicle location and mileage. Its own telematics capability sends all tire vehicle data off the vehicle to TireStamp where the data is analyzed, hot inflation pressure is converted to cold pressure, and the data is stored in a database. This gives the fleet visibility of all of its tires not just the tires on one vehicle at a time and forms the foundation of a total tire maintenance program.

Application insight

According to TPMS and ATIS manufacturers, TPMS and ATIS systems are far more common on trailers than on tractors. Across the industry, a low percentage of tractors are utilizing TPMS today, whereas roughly one in three new trailers are spec’d with TPMS or inflation systems, according to Aperia’s Carter. Penetration within the tractor market is increasing, yet currently, Continental reported that around 9% of truck orders include a TPMS system and approximately 16% of trucks on the road today are equipped with TPMS.

MobileTRAQ-Que
The MobileTRAQ Vue is a customizable in-cab monitoring device, while MobileTRAQ Que is a non-display device that allows for remote truck or trailer monitoring.

Though all TPMS systems are different, many systems pair tractor and trailer application. Continental’s ContiPressureCheck TPMS solution, for example, most commonly operates as a tractor and trailer combination, but it has the ability to run independently on just the truck or just the trailer. Regardless of the how it is applied, the results are exactly the same, explained Terry Smouter, Continental business development manage, “Fleet managers should be aware of the different TPMS system capabilities and how those systems align with their fleet’s application,” Smouter explained. “CSA violations are very important to avoid, but the major benefit of any TPMS system is the cost savings you can realize if it is used properly. A fleet can avoid unnecessary tire-related roadside service calls. Our system more than pays for itself by preventing just one tire-related road side service call and that doesn’t even include late delivery fees or possible lost business. Additionally, fleets can expect extended mileage and additional life cycles out of their casings by just maintaining proper inflation levels.”

When considering a TPMS or ATIS solution, it’s important to be aware that you have choices. “Systems that have been on the market for years are easy to find and are typically the least expensive in terms of acquisition cost,” Stemco’s Montgomery explained. However, systems like Aeris, though they carry a small premium at acquisition, can significantly reduce the total cost of ownership by including time and money-saving features and requiring less maintenance.”

Additionally, Wabco’s Fitch recommends that fleet managers make sure the robustness of the TPMS matches the fleet’s application, “Some TPMS systems have been adapted from passenger car systems that don’t match the rigorous environmental conditions of the average commercial fleet.”

Savings beyond CSA

Continental-ContiPressureCheck
Continental’s ContiPressureCheck TPMS solution

With tires being one of the top costs for fleets, it’s clear that any system that helps to maintain them will generate significant savings. Running tires at optimal pressure levels will reduce rolling resistance, which ultimately improves fuel consumption.

“[TPMS and ATIS] increases tire life, as driving on underinflated tires damages the tire casing, preventing the tires from being retreaded or regrooved,” stated Tom Bosler, director, global product planning for Dana Commercial Vehicle Driveline Technologies. Dana is currently field-testing the Spicer-optimized tire pressure system for commercial vehicles—an internal axle system for powered commercial vehicles. Additionally, the Spicer optimized tire pressure system has been engineered to automatically maintain proper inflation for drive and steer axles. “Underinflated tires are also more likely to fail from excessive heat that is caused by operating at low pressure, resulting in costly repairs and lost time on the road.”

There are other numerous advantages to keeping a close eye on tire pressure: From inflation systems improving traction and handling to ensuring proper tire tread wear, helping to preserve the tire casing for retread and lowering the tire’s cost per mile. It comes down to ensuring that your tires are operating effectively and efficiency on the road, while mitigating the risk of any costly tire failure consequences.

You May Also Like

Panelite releases new guards, deflectors, sunvisors for Peterbilt 589

Coming to market after a year of development, Panelite says the components fit the Peterbilt
589, and match its style.

Panelite-Peterbilt-589-new-fender-guards-bug-deflectors-sunvisors

Stainless steel accessory manufacturer Panelite has released several new products designed specifically for the new Peterbilt 589. Over the past year, Panelite says its engineers worked to design and develop fender guards, bug deflectors, sunvisors, cab and sleeper panels along with air cleaner light bars for the Peterbilt 589.

"Panelite products are designed to withstand North America's weather and the challenging conditions drivers encounter from coast to coast," said Colin Thur, national sales manager, truck OEM for High Bar Brands, Panelite's parent company.

Commercial tire market cautiously recovering from 2023 challenges

To better understand commercial tire expectations for the remainder of the year, we spolke with Pierluigi Cumo, VP of B2B products at Michelin North America.

Michelin-truck-tires
Phillips takes two awards at Penske Supplier Conference

Phillips Industries was awarded both the 2023 Best Performing Supplier – Components Award, and the 2023 Best Innovation Supplier Award.

Phillips-two-awards-2024-penske-supplier-conference-600
SAF-Holland to build specialty fifth wheel manufacturing plant

After nearly 50 years and 3 million fifth wheels produced, SAF-HOLLAND will move production from Wylie, TX to the new facility, once complete.

SAF-HOLLAND-TX-fifth-wheel-plant-rendering
Dayton Parts offers new aftermarket products for Freightliner, Mack, Cummins and Hino applications

A new DPF differential pressure sensor, engine oil dipsticks and fuel injector wiring harnesses designed to match OEM spec.

Dayton-parts-releases-2-sensor-dipstick-harnesses

Other Posts

The vital nature of multi-v belt systems

From the alternator to A/C, the multi-v belt uses a truck’s engine to operate crucial components. Here’s how to keep things running smoothly.

Continental-Pop-the-Hood-video-series
Cal Ganda’s Continental journey: From manufacturing to aftermarket leadership

As Head of Aftermarket Distribution at ContiTech Industrial Solutions Americas, Cal embodies servitude leadership, prioritizing team success and customer-centricity.

How supplier partnerships move sustainability forward in commercial transportation

The right tires can contribute to significant forward sustainable progress for commercial fleets.

michelin-dtna-tires
K&M Tire hires new executive vice president

In his new role, Jon Zurcher is expected to work with current leadership to strengthen and build on the company’s strategic plans.

KM-tire-Logo