When it comes to refrigeration units, Thermo King says a good maintenance program will save energy, time and money. The company offers its customers “Tech Tips” to improve maintenance programs and maximize equipment efficiency and run time:
Engines: Any time you replace an engine, install a new oil pressure switch, a new water temperature switch and a new coolant thermostat.
Compressor: When replacing a compressor, always replace the drier and install a compressor oil filter kit. Thermo King also recommends running the unit for a few hours at testing with the oil test kit to validate the compressor oil is acceptable. Always remember to closely inspect the compressor drive bushings for wear.
Alternator: Any time you change an alternator, we recommend installing a new drive belt to ensure maximum uptime before the next related service.
Starter: Any time you replace a starter, always test the battery and the charging system for performance.
Refrigeration: Any time a refrigeration system is open for service, we recommend you change the drier to ensure maximum system performance. If the system was open for any amount of time, we also recommend testing the compressor oil with an oil test kit to ensure the oil is not contaminated.
