Penray introduces synthetic media heavy-duty coolant filters

Penray introduces synthetic media heavy-duty coolant filters

The Penray Cos. Inc. introduced a new line of heavy-duty coolant filters featuring synthetic media with triple-layer engineering. In addition to the synthetic media, many of these new filters incorporate Penray’s Need-Release technology, which introduces coolant additives and fortifiers on an as-needed basis, stabilizing the coolant for optimum effectiveness. Penray also offers synthetic media filters for use with Extended Life Coolants (ELCs).

The new Penray synthetic media coolant filters are designed to last up to 150,000 miles, 15 months or 3,000 operating hours. This new Penray coolant filter media is fully compatible with conventional coolants as well as new-generation Extended Life Coolants (ELCs). According to the company, they are available for all popular Class 6, 7 and 8 vehicles.

Key to the effectiveness and durability of these new heavy duty coolant filters is Penray’s cites its triple-layer, fiberglass-based filtering media as the reason for its exceptional filtration, even in extreme operating conditions. This design is built on a structural steel screen with an epoxy coating that provides a foundation which is wrapped in a non-woven sheet of polyester. All this is encased in Penray’s fiberglass filtration media. The triple-layer construction allows these new filters to achieve filtering efficiency and capacity for up to 150,000 miles.

Penray’s Need-Release filters include a membrane that senses deterioration in the coolant chemistry and responds by releasing one of its four charges of additives and fortifiers to restore coolant chemistry. Over time, as key components of the coolant are depleted, the Need-Release technology releases additional charges of supplements to again restore the coolant to viability. This process continues over extended periods of time until all four charges have been released.

Penray also offers mounting brackets, plates and hardware for retrofit, as well as threaded bushing adapters, which will allow fleet maintenance personnel to assure that all vehicles in the fleet use the same coolant filter.

“The introduction of these new synthetic media coolant filters assures superior filtration for the long service intervals that are becoming common in heavy duty fleet maintenance,” said Sarah Cooper, product manager for Penray.

You May Also Like

Premier Manufacturing marks 100 years in business

Now a part of High Bar Brands, the Oregon-based manufacturer has produced trailer safety components for over a century.

Premier-Manufacturing-100-years-founder-Dewey-Weiss

Premier Manufacturing recently announed the celebration of its centennial anniversary. The brand was founded by Dewey Weiss in Portland, Oregon, producing a pintle-style coupling for heavy-duty trucks and trailers. The brand is now a part of High Bar Brands.

Premier Manufacturing has grown from a small business in Portland to its current location in Tualatin, OR, where it produces couplings, drawbar eyes, dolly jacks, hinge assemblies, and front-end assemblies. Premier adds that it has long focused on innovation, evidenced by nearly 50 mechanical patents granted during its first 100 years in business. Five patents remain active, and all five were granted within the last ten years.

FlowBelow introduces AeroFender device for drag reduction, fuel efficiency improvement

Independent testing found that FlowBelow’s new AeroFender saved 1.49 gallons of fuel for every 1,000 miles driven.

FlowBelow-AeroFender-detail
Link redesigns LB20 ramps

Link’s LB20 ramps are 25 pounds lighter, feature spring-assist lift mechanisms, stow at an 8-inch vertical depth and are easier to install.

Link-manufacturing-new-LB20-ramps-logo
PACCAR Parts names Weller as 2023 Supplier of the Year

Throughout 2023, Weller contributed to PACCAR Parts overall network performance by exceeding 17% y/y growth.

PACCAR-Parts-Logo
Clore Automotive appoints new vice president of sales

The company says his invaluable experience and customer-centric approach make Dan Lucas right for the role.

Dan-Lucas-Clore-Automotive

Other Posts

Continental Tire opens Retread Solutions Center in South Carolina

The company hopes to uncover new improvements and technologies to innovate the retread process.

Continental-Tire-retread-solutions-center-south-carolina
Akebono launches severe-duty brake pads for Ford models

The company says its new brake pads last longer and can lower maintenance costs, while still providing the stopping power fleets need.

Dayton Parts introduces fuel injector wiring harnesses, EGR coolers, trailer air tank reservoirs

Fuel injector wiring harnesses, exhaust gas recirculation coolers and trailer air tank reservoirs designed to match OEM spec.

Dayton-Parts-2-product-releases
Thermo King launches Electrification Readiness Program

The dealer program is designed to enable customers’ transition to more sustainable fleet solutions, improved efficiency and decarbonization.

Thermo-King-Electrification-Readiness-Program