The B400T utilizes a PC-based system with Hunter’s exclusive WinSI software to measure brake forces and vehicle weight at each wheel on multi-axle vehicles such as tractors and semi-trailers, tandem-axle tractors, buses and two-axle vehicles, including passenger cars and light trucks. Single-, tandem- and triple-axle vehicles can be tested with full loads.

To perform the test, a technician simply drives the vehicle onto the tester plates and applies the brakes. The precision load cells within the plates automatically measure a variety of brake performance conditions, which are then digitally transferred to the computer, analyzed and displayed on the monitor in color-coded charts.

The B400T identifies many conditions that affect brake performance:

Axle-to-Axle Imbalance: Tests unequal brake performance comparing axles to determine if one would lock up first causing a loss of steering control or jackknife.

Left-to-Right Imbalance: Tests unequal brake performance comparing each side of the vehicle to find a pull and potential to skid.

Static Weight, Dynamic Weight and Weight Shift: A measurement of weight of the vehicle and load at a stop, weight of the vehicle and load when braking and rear-to-front weight shift when braking.

Rollover Propensity: With the various weight measurements, the software can determine the vehicle’s center of gravity and potential of rollover.

Parking or Emergency Brake: A test for both mechanical brakes on straight trucks and spring brakes on air-brake systems.

For additional information, visit http://www.hunter.com.