Prestolite releases IdlePro alternator, PowerPro Extreme 5 starter

Prestolite releases IdlePro alternator, PowerPro Extreme 5 starter

Prestolite has introduced the Leece-Neville Heavy Duty Systems IdlePro alternator and PowerPro Extreme 5 starter.

According to the company, features of the IdlePro alternators include:

  • 12V, 210- and 240-amp outputs available in a dual internal fan design;
  • Minimum of 63% of a unit’s rated maximum output at engine idle (for certain applications);
  • Remote Sense capable – returns battery to full charge between stops and reduces overall charging time;
  • Rated up to 125°C – ideal for the high-temperature environments often found in work truck applications;
  • eCoated, heavy-duty housing to reduce corrosion and improve vibration resistance;
  • No core;
  • Assembled in the U.S.

PowerPro Extreme 5 starter features include the following, as described by the company:

  • 12V, 5kW starting power;
  • Sealed and noseless design to protect against dust, oil and other contaminants;
  • Planetary gear reduction design for higher torque/speed and less power consumption;
  • Integral Magnetic Switch technology to eliminate voltage drops;
  • Soft start relay technology to prevent ring gear damage;
  • 21.5 lb. weight;
  • No core.

The company adds that these products are backed by a warranty that provides comprehensive coverage for truck applications, including a three-year/unlimited mileage warranty for alternators and a two-year/unlimited mileage warranty for starters, and an extended list of available qualifying failure claims.

You May Also Like

Premier Manufacturing marks 100 years in business

Now a part of High Bar Brands, the Oregon-based manufacturer has produced trailer safety components for over a century.

Premier-Manufacturing-100-years-founder-Dewey-Weiss

Premier Manufacturing recently announed the celebration of its centennial anniversary. The brand was founded by Dewey Weiss in Portland, Oregon, producing a pintle-style coupling for heavy-duty trucks and trailers. The brand is now a part of High Bar Brands.

Premier Manufacturing has grown from a small business in Portland to its current location in Tualatin, OR, where it produces couplings, drawbar eyes, dolly jacks, hinge assemblies, and front-end assemblies. Premier adds that it has long focused on innovation, evidenced by nearly 50 mechanical patents granted during its first 100 years in business. Five patents remain active, and all five were granted within the last ten years.

FlowBelow introduces AeroFender device for drag reduction, fuel efficiency improvement

Independent testing found that FlowBelow’s new AeroFender saved 1.49 gallons of fuel for every 1,000 miles driven.

FlowBelow-AeroFender-detail
Link redesigns LB20 ramps

Link’s LB20 ramps are 25 pounds lighter, feature spring-assist lift mechanisms, stow at an 8-inch vertical depth and are easier to install.

Link-manufacturing-new-LB20-ramps-logo
PACCAR Parts names Weller as 2023 Supplier of the Year

Throughout 2023, Weller contributed to PACCAR Parts overall network performance by exceeding 17% y/y growth.

PACCAR-Parts-Logo
Clore Automotive appoints new vice president of sales

The company says his invaluable experience and customer-centric approach make Dan Lucas right for the role.

Dan-Lucas-Clore-Automotive

Other Posts

Continental Tire opens Retread Solutions Center in South Carolina

The company hopes to uncover new improvements and technologies to innovate the retread process.

Continental-Tire-retread-solutions-center-south-carolina
Akebono launches severe-duty brake pads for Ford models

The company says its new brake pads last longer and can lower maintenance costs, while still providing the stopping power fleets need.

Dayton Parts introduces fuel injector wiring harnesses, EGR coolers, trailer air tank reservoirs

Fuel injector wiring harnesses, exhaust gas recirculation coolers and trailer air tank reservoirs designed to match OEM spec.

Dayton-Parts-2-product-releases
Thermo King launches Electrification Readiness Program

The dealer program is designed to enable customers’ transition to more sustainable fleet solutions, improved efficiency and decarbonization.

Thermo-King-Electrification-Readiness-Program