Springtime truck maintenance tips to recover from winter's toll

Springtime truck maintenance tips to recover from winter’s toll

Every autumn, we talk a lot – justifiably – about preparing trucks for winter’s harsh conditions. But as spring arrives across North America, it’s just as important to take preventive maintenance steps and address the tolls that a season of wild temperature swings and corrosive road chemicals can take on your vehicles.

This installment of the Bendix Tech Tips covers springtime reminders that help put winter’s troubles in the rear-view mirror.

Tough times for trucks

Bendix-Tech-Tip-air-dryer-corrosion

“Winter weather is hard on all the physical components of your air brake system,” said Richard Nagel, Bendix’s director of marketing and customer solutions – air supply and drivetrain. “You’ve got the contrast of freezing temperatures and heat coming off the engine; you get trapped moisture due to freeze-thaw cycles, thermal cycling, and humidity; you get metals expanding and contracting, and plastics softening and hardening. It’s the same reason pavement cracks and potholes grow in the winter.”

That means drivers and technicians need to pay extra attention this time of year with both visual checks and keen awareness of component performance. Air dryers mounted on the frame rail are susceptible to corrosion due to their exposure to the road, particularly the seats around the purge and pressure protection valves, and the governor connection. Steel air tanks can also corrode and develop small punctures. Dirt, sand, and road chemicals can mix with water and form residue that can clog and prevent proper operation of air dryer parts like the pressure protection and purge valves.

Inspections should also include an eye for cracking or breakage of plastic air-line tubing that connects the dryer to the truck’s air system. Push-to-connect air fittings can also be affected by chemicals and temperature cycling.

In the cab and on the road

Bendix-Tech-Tip-air-dryer-purge-valve-corrosion-300

Behind the wheel, there are other indicators of winter damage to an air brake system.

“Just because you don’t immediately see or hear any leaks doesn’t mean they’re not present,” Nagel noted. “If you notice that it’s taking significantly longer to charge the tanks – say, three or four minutes compared to one or two – then that’s a sign that your air brake system is losing air. The same thing applies if you notice the system charging more often. And an increase in charging cycles also means more air going through the dryer, which affects the life of the dryer cartridge.”

Additionally, if the air dryer cartridge wasn’t replaced in the fall, he added, then spring is a good time to switch it out.

Drivers might also notice a general “stickiness” in the feel of the brakes, as if they’re responding more slowly to the push of the brake pedal. This can also indicate valve seals in the system that have had their lubricant degraded through corrosion, or possibly by the use of de-icing solutions if the air system froze during the winter.

“That’s why we never recommend adding anything to the air system – although we recognize that some situations may call for the drastic measure of using a brake anti-freeze compound,” Nagel said. “If you’ve had to do this, then spring is a great time to check for leaks around brake valves where O-rings might have been exposed to these chemicals or replace valves that may be sticking internally due to loss of lubrication. Some fleets even routinely just change out air valves as part of post-winter preventive maintenance.”

It’s all connected

Higher-level air-connected technologies like antilock braking systems (ABS) can also suffer from difficult winter conditions.

“Wire harnesses get chipped by gravel or experience corrosion, and once the wires get wet, they can short out,” Nagel said. “Any wiring on the chassis is at risk, and our technical support team says post-winter electrical shorts and the resulting air brake valve malfunctions are the number one source of calls to Bendix this time of year.”

As more trucking systems depend on a reliable supply of compressed air — including automated manual transmissions (AMTs), emissions controls, and full stability — proper maintenance of the air system is key to keeping vehicles on the road and in good operating condition. This spring, spending some extra time addressing the ravages of winter can help enhance fleet safety and ease the road ahead for the men and women at the wheel.

This tech tip was contributed by Bendix.

You May Also Like

Bendix releases technical materials for ADAS support

The latest materials are meant to help technicians properly set up, inspect and diagnose several components integrated with ADAS.

truck-data-generic

The latest technical materials from Bendix Commercial Vehicle Systems are designed to help technicians properly set up, inspect and diagnose several components integrated with advanced driver assistance technologies, including trailer antilock brakes, steering systems and forward-looking cameras.

“The safety systems on today’s commercial vehicles are more road-proven and effective in supporting safe drivers than ever,” said Nicole Oreskovic, Bendix vice president of sales and marketing. “They’re also more complex and interconnected, which means we need to thoroughly support the skilled people who keep them in top operating condition.”

Bendix offers spring fleet maintenance tech tips

Bendix shares tips to allow fleets to hit the road with enhanced safety, uptime, and peace of mind this spring, by addressing winter’s toll on your trucks.

Truck-tractor-trailer-maintenance-generic
One Nexus Group acquires Commercial Truck Training

One Nexus says it can now offer three services rather than two: fleet management training, sales training, and recruitment/hiring support.

pretrip-truck-inspection-generic-1400
Noregon releases DLA+ 3.0 Vehicle Interface Adapter

Enhanced speed and auto-detecting Smart Cable technology are among the improvements Noregon is touting over the previous generation.

Noregon-DLA-3.0-Adapter-Kit
Direct labor vs. indirect labor in fleet shops

Keeping tabs on labor expenditures is important, but make sure you’re taking everything into account before assigning blame.

service-technician-generic-maintenance-downtime-repairs

Other Posts

Where you see the safety, connectivity benefits in the latest truck equipment

As connectivity improves, so does safety. Take a look at the technologies in Volvo’s all-new VNL that mitigate risk in the cab, and on the road.

All-new-Volvo-VNL-Connectivity
Why fuel filtration science matters

Fleetguard shares the story of filtration science leading to a biodiesel solution with a seven-time increase in performance.

Bendix: Air disc brake production has doubled since 2018

Commercial ADB adoption rates in Class 6-8 vehicles are now up over 50% according to Bendix.

Bendix-Bowling-Green-ADB-air-disc-brake-doubling-production
The trucking life of the internal combustion engine going forward

A glimpse into the fossil-free future of truck engines that run on everything from biodiesel to natural gas to hydrogen.

volvo-fuel-cell-1400